How to build a black box?

How to build a black box?

 I found this tutorial quite a long time ago and I don't know if it still works. Nevertheless , it might be interresting to read, you might even learn something from it! I would have gladly given credit to it's author but won't since I have no idea who he is. So here is his tutorial that remained unchanged ( I hope!):

A BLACK BOX
is a device that is hooked up to your phone that fixes your phone so that when you get a call, the caller doesn't get charged for the call. This is good for calls up to 1/2 hour, after 1/2 hour the phone Co. gets suspicious, and then you can guess what happens.

What this little beauty does is keep the line voltage from dropping to 10v when you answer your fone. The line is instead kept at 36v and it will make the fone think that it is still ringing while your talking. The reason for the 1/2 hour time limit is that the
phone CO. thinks that something is wrong after 1/2 an hour of ringing.

All parts are available at Radio Shack. Using the least possible parts and arangement, the cost is $0.98 !!!! And that is parts for two of them! Talk about a deal! If you want to splurge then you can get a small PC board, and a switch. There are two
schematics for this box, one is for most normal fones. The second one is
for fones that don't work with the first. It was made for use with a Bell
Trimline touch tone fone.

** Schematic 1 for most fones **
** LED ON: BOX ON **

FROM >--------------------GREEN-> TO
LINE >--! 1.8k LED !---RED--> FONE
!--///--!>--!
! !
------>/<-------
SPST



Parts: 1 1.8k 1/2 watt resistor
1 1.5v LED
1 SPST switch

You may just have two wires which you connect together for the switch.


** Schematic 2 for all fones **
** LED ON: BOX OFF **

FROM >---------------GREEN-> TO
LINE >------- ---RED--> FONE
! LED !
-->/<--!>--
! !
---///---
1.8k
�Parts: 1 2 watt resistor
1 1.5v LED
1 DPST switch


Here is the PC board layout that I recommend using. It is neat and is very easy to hook up.

Schematic #1 Schematic #2

************** ****************
* * * ------- *
* --<LED>--- * * ! ! *
* ! ! * * ! <SWITCH> *
* RESISTOR ! * * ! ! ! *
* ! ! * * ! ! / *
* -------- ! * * ! ! *
* ! ! * * ! <LED>! / *
* --SWITCH-- * * ! ! *
* ! ! * * ! ! / *
L * ! ! * F L * ! ! ! * F
I>RED- -RED>O I>RED- ---RED>O
N>-----GREEN---->N N>-----GREEN------>N
E * h * E E * * E
************** ****************

Once you have hooked up all the parts, you must figure out what set of wires go to the line and which go to the fone. This is because of the fact that LED's must be put in, in a certain direction. Depending on which way you put the LED is what controls what wires are for the line & fone.

How to find out:

Hook up the box in one direction using one set offor line and the other for fone.

*NOTE* For Model I switch should be OFF.
*NOTE* For Model ][ switch should be set to side connecting the led.

Once you have hooked it up, then pick up the fone and see if the LED is on. If it is, the LED will be lit. If is doesn't light then switch the wires and try again. Once you know which are which then label them. *NOTE* - If neither directions worked then your
�lable the switch in its current position as BOX ON.

How to use it:

The purpose of this box is for poeple who call you not to pay so it would make
sence that it can only be used to receive! calls. When the box is *ON* then you may only recieve calls. Your fone will ring like normal and the LED on the box will flash. If you answer the fone now, then the LED will light and the caller will not be charged. Hang up the fone after you are done talking like normal. You will not be able to get a dial-tone or call when the box is on, so turn the box *OFF* for normal calls. I don't recommend that you leave it on all the time, as you don't want it to answer when Ma Bell calls!

Hope it brought something to those who read it.

XIII
numberXIII@Phreaker.net

How to build a black box?

How to build a black box?

 I found this tutorial quite a long time ago and I don't know if it still works. Nevertheless , it might be interresting to read, you might even learn something from it! I would have gladly given credit to it's author but won't since I have no idea who he is. So here is his tutorial that remained unchanged ( I hope!):

A BLACK BOX
is a device that is hooked up to your phone that fixes your phone so that when you get a call, the caller doesn't get charged for the call. This is good for calls up to 1/2 hour, after 1/2 hour the phone Co. gets suspicious, and then you can guess what happens.

What this little beauty does is keep the line voltage from dropping to 10v when you answer your fone. The line is instead kept at 36v and it will make the fone think that it is still ringing while your talking. The reason for the 1/2 hour time limit is that the
phone CO. thinks that something is wrong after 1/2 an hour of ringing.

All parts are available at Radio Shack. Using the least possible parts and arangement, the cost is $0.98 !!!! And that is parts for two of them! Talk about a deal! If you want to splurge then you can get a small PC board, and a switch. There are two
schematics for this box, one is for most normal fones. The second one is
for fones that don't work with the first. It was made for use with a Bell
Trimline touch tone fone.

** Schematic 1 for most fones **
** LED ON: BOX ON **

FROM >--------------------GREEN-> TO
LINE >--! 1.8k LED !---RED--> FONE
!--///--!>--!
! !
------>/<-------
SPST



Parts: 1 1.8k 1/2 watt resistor
1 1.5v LED
1 SPST switch

You may just have two wires which you connect together for the switch.


** Schematic 2 for all fones **
** LED ON: BOX OFF **

FROM >---------------GREEN-> TO
LINE >------- ---RED--> FONE
! LED !
-->/<--!>--
! !
---///---
1.8k
�Parts: 1 2 watt resistor
1 1.5v LED
1 DPST switch


Here is the PC board layout that I recommend using. It is neat and is very easy to hook up.

Schematic #1 Schematic #2

************** ****************
* * * ------- *
* --<LED>--- * * ! ! *
* ! ! * * ! <SWITCH> *
* RESISTOR ! * * ! ! ! *
* ! ! * * ! ! / *
* -------- ! * * ! ! *
* ! ! * * ! <LED>! / *
* --SWITCH-- * * ! ! *
* ! ! * * ! ! / *
L * ! ! * F L * ! ! ! * F
I>RED- -RED>O I>RED- ---RED>O
N>-----GREEN---->N N>-----GREEN------>N
E * h * E E * * E
************** ****************

Once you have hooked up all the parts, you must figure out what set of wires go to the line and which go to the fone. This is because of the fact that LED's must be put in, in a certain direction. Depending on which way you put the LED is what controls what wires are for the line & fone.

How to find out:

Hook up the box in one direction using one set offor line and the other for fone.

*NOTE* For Model I switch should be OFF.
*NOTE* For Model ][ switch should be set to side connecting the led.

Once you have hooked it up, then pick up the fone and see if the LED is on. If it is, the LED will be lit. If is doesn't light then switch the wires and try again. Once you know which are which then label them. *NOTE* - If neither directions worked then your
�lable the switch in its current position as BOX ON.

How to use it:

The purpose of this box is for poeple who call you not to pay so it would make
sence that it can only be used to receive! calls. When the box is *ON* then you may only recieve calls. Your fone will ring like normal and the LED on the box will flash. If you answer the fone now, then the LED will light and the caller will not be charged. Hang up the fone after you are done talking like normal. You will not be able to get a dial-tone or call when the box is on, so turn the box *OFF* for normal calls. I don't recommend that you leave it on all the time, as you don't want it to answer when Ma Bell calls!

Hope it brought something to those who read it.

XIII
numberXIII@Phreaker.net

How To Boot Xp Faster (updated)

First of all, this tweak only apply to those who only have one HDD on their primary IDE channel (nothing else on device 0 or 1) and a CD-ROM and/or DVD-ROM on the secondary IDE channel. Each time you boot Windows XP, there's an updated file called NTOSBOOT-*.pf who appears in your prefetch directory (%SystemRoot%Prefetch) and there's no need to erease any other files as the new prefetch option in XP really improves loading time of installed programs. We only want WindowsXP to boot faster and not decrease its performance. Thanks to Rod Cahoon (for the prefetch automation process...with a minor change of mine) and Zeb for the IDE Channel tweak as those two tricks, coupled together with a little modification, result in an EXTREMELY fast bootup:

1. Open notepad.exe, type "del c:windowsprefetch tosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:
2. From the Start menu, select "Run..." & type "gpedit.msc".
3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.
4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".
5. Click "OK", "Apply" & "OK" once again to exit.
6. From the Start menu, select "Run..." & type "devmgmt.msc".
7. Double click on "IDE ATA/ATAPI controllers"
8. Right click on "Primary IDE Channel" and select "Properties".
9. Select the "Advanced Settings" tab then on the device 0 or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".
10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.
11. Reboot your computer.

WindowsXP should now boot REALLY faster. 

How To Block Websties Without Software, block websites

How To Block Websties Without Software, block websites

 Steps:

1] Browse C:\WINDOWS\system32\drivers\etc
2] Find the file named "HOSTS"
3] Open it in notepad
4] Under "127.0.0.1 localhost" Add 127.0.0.2 www.sitenameyouwantblocked.com , and that site will no longer be accessable.
5] Done!

-So-

127.0.0.1 localhost
127.0.0.2 www.blockedsite.com

-->www.blockedsite.com is now unaccessable<--


For every site after that you want to add, just add "1" to the last number in the internal ip (127.0.0.2) and then the addy like before.

IE: 127.0.0.3 www.blablabla.com
127.0.0.4 www.blablabla.com
127.0.0.5 www.blablabla.com

etc

HOW TO BLOCK PEOPLE ON WINMX WHO SHARE NOTHING

Some people seem to think our network is a kind of a store a they just pick what they want without sharing anything!
(and other considere our net as a schoolyard where one "trade"... Childish!)

*********************

You can help everybody getting rid of them by boycotting them that way:

You "browse" each uploading user.


** If he/she shares more than, say, a hundred files (and NOT in the WinMx directory only, putting them elsewhere and unshared when entirely downloaded !!!), OK.
NB: a hundred is not a lot but 1- we don't all have a large HDD and some files are big 2- when you begin...!                                                                            
** If not:

You can send a message to him/her to ask why there is no real share, or not at all, for they can have forgotten to do so: give them a chance! The first time, I didn't understand that I had to choose the shared files types, so I shared nothing, unwillingly. Somebody told it to me in a message.

If no answer and/or still no shared file, you can exclude the selfish beast:
(Thanks to dwhite who gave the modus operandi on the WinMx net)

To block somebody from downloading, add the name to your HOTLIST (right-click the name then "Add to hotlist") then to your IGNORE list.

You won't receive any messages nor will they enter your queue, during that session at least.

********************

On the contrary, you can help people who share a lot by starting the tranfer when they are in your queue, or give a higher bandwith priority...

How To Backup Ps2 Games

 Hi guys...here I found a tutorial of another Foum:
INFO: Text didn't write by me!


Okay, these are some methods to backup PS2 titles and Xbox titles, in order to play a backup you need a modchip of some sort, I have also included a tutorial on boot methods. Follow any one of these instructions to fit your needs. You can tell what format the PS2 title is by looking at the written side of the disc, DVD's are Silver and CD's are Purple. The DVD backup methods here consist of reading the image to the hard drive then burning it to the media for an easier backup, this depends on your hardware and it?s setup. I say that because the proper setup would be to have the Reader and Writer on separate IDE cables. This allows no cross information when doing Disc to Disc/On the fly copying. But, since most people would not know how to check or fix this, I suggest reading the image to your Hard Drive and then burning from there. *A little useful trick*, If the DVD backup "image" is small enough in size you can fit it onto a CD-R (80 minute or larger if need be) instead of using a more expensive DVD-R. I have done this succesfully using Prassi and the first tutorial for it below. In addition a DVD Movie backup will play on a PS2/Xbox without a chip. As I get more info I will update. Dexter


PS1/PS2 CD backup tutorials


Using CloneCD (v4.x.xx) for PS1/PS2

1. Start CloneCD
2. Select "Copy CD"
3. Select your Reader, press Next
4. Select "Game CD", press Next
5. Select/Deselect your options here (on the fly, cue or delete) then press Next
6. Select your Writer, press Next
7. Select your burn speed and "Game CD"
8. Press "OK" to begin


Using Alcohol 120% for PS1/PS2

1. Start Alcohol 120%
2. Select ?Copy Wizard?
3. Select your Reader & Read Speed
4. Select or Deselect ?Copy current disc on the fly?
5. For Datatype select which console PS1 or PS2, press Next
6. Select your Image location and Name for it, press Next
7. Select you Writer, Write Speed and anything else you feel you might need
8. Make sure the Datatype selected is the same you chose above
9. Press Start to begin


PS2 DVD backup tutorials


Using Prassi

1. Start Primo
2. Select "go to full application"
3. Right Click the drive that has your original in it
4. Select "build global image" and choose a path for the image (preferably on an NTFS opsys)
5. After the image is extracted go to next step
6. Choose the 3rd disc icon from the left *or* click file, new job, Global/Other Image
7. Then just burn the .gi (global image) of the game


This next way has one less step which saves some time because once you press record it does everything by itself (if you have a DVD reader and DVD Writer)

1. Start Primo
2. Use the "PrimoDVD Starter" (it's easier, and less confusing)
3. Choose "disc copy"
4. Select your Reader and Also your Writer
5. Select "make a temp image on HD..."
6. Select your burn speed and then record to begin


Using Nero

1. Start Nero, Use the Wizard (for easy use)
2. Select "DVD" then select Next
3. Select "Copy a DVD" then select Next
4. Select your source drive
5. Check OFF "copy on the fly" then select next
6. Select your write speed
7. Select either "Test", "Test and Burn" or "Burn"
8. Press "Burn" to begin

This next way is without the Wizard

1. Start Nero, and select "File" then "New..."
2. On upper left side of the window from the drop down menu select "DVD"
3. Select "DVD Copy" Icon
4. Select "Copy options" tab
5. Check OFF "copy on the fly"
6. Select source drive and read speed
7. If needed Select "Image" tab to choose image directory and select/deselect "delete image..."
8. Select "Burn" tab and choose your settings
9. Press "Copy" to begin


Using Alcohol 120%

1. Start Alcohol 120%
2. Select ?Copy Wizard?
3. Select your Reader
4. For ?Separate Image file every:? choose ?Never Separate?
5. Select or Deselect ?Copy current disc on the fly?, press Next
6. Select your Image location and Name for it, press Next
7. Select you Writer, Write Speed and anything else you feel you might need
8. Select or Deselect ?Delete image file after recording?
9. Press Start to begin


XBOX backup tutorials


Xbox original games are burned from the outside in. The only way to backup a title is to have a modchip like X-exuter (best), Enigma, or Xodus/Matrix. You also have to flash the bios and have a CD program inserted or installed into the X-Box named EVO-X (this allows you to assign the X-Box an IP address). The game has to be stored on the X-Box's HD, this allows you to file transfer the title to your PC using an ftp program like FlaxhFXP (best) or similar. From there you use a burning application to make the backup. Some applications allows you to "drag & drop" right from the Xbox or you can build an ISO of the image then burn to CD-R/W or DVD-R/W backup. (I will update this to show steps as soon as I have a minute)


Modded PS2 with or without Action Replay/GameShark CD & DVD backup booting methods

PS2 with NeoKey/Sbox & AR/GS, PS1 CD backup booting

1. Turn on PS2 and NeoKey/Sbox
2. Press Eject
3. Insert PS1 CD backup
4. Press reset
5. PS2 tray will close
6. PS1 CD backup will now boot


PS2 with NeoKey/Sbox & AR/GS, PS2 CD backup booting

1. Have AR/GS dongle in a memory card slot
2. Power on your PS2
3. Insert AR/GS disc
4. At the AR/GS menu, select Start Game, With/Without codes
5. Eject and swap to your PS2 CD backup and press X.
6. Screen will change and game will now boot

* Note - Neokey will not play DVD-R!
* Note - Old versions of AR2/GS2 you might need to press R1+O instead of X to boot games


PS2 with Neo 2.2, PS1 CD backup booting

1. Turn on PS2
2. Press Eject
3. Insert PS1 CD backup
4. Press reset
5. PS2 tray will close
6. PS1 CD backup will now boot


PS2 with Neo 2.2 & AR/GS, PS2 CD backup booting

1. Have AR/GS dongle in a memory card slot
2. Power on your PS2
3. Insert AR/GS disc
4. At the AR/GS menu, select Start Game, With/Without codes
5. Eject and swap to your PS2 CD backup and press X.
6. Screen will change and game will now boot


PS2 with Neo 2.2 & AR/GS, PS2 DVD backup booting

1. Have AR/GS dongle in a memory card slot
2. Power on your PS2
3. Insert AR/GS disc, close tray
4. Power off your PS2, wait a few seconds
5. Press and Hold Reset button to load AR/GS
6. At the AR2/GS2 menu, press EJECT while still holding Reset
7. Swap AR/GS disc for an Original-TOC-DVD* and wait 10 seconds
8. Select "AR/GS Codes"
9. Highlight "Add new code" and press X to get to the next screen
10. Press X three times. You will see "Updating code list please wait" each time)
11. Press "Start" on controller
12. Select "Without codes", press X
13. Then Press X again, and immediately release the Reset button, you will see "Updating code list please wait"
14. The PS2 tray will eject allowing you to swap Original-TOC-DVD* for DVD backup and then close on it?s own
15. Screen will change and game will now boot

* Note - "Original-TOC-DVD" is an original DVD that is a larger file size than the backup
* Note ? For a shortcut make a few ?Add new codes? and after step 8 just highlight one of them and press square to delete it, then proceed on with step 11

PS2 with Messiah

1. PSX Backups will boot directly.
2. PS2 CD-R Backups will boot directly.
3. PS2 Unpatched EA backups will boot directly.
4. PS2 DVD-R Backups will boot directly.


PS2 with Magic 2, 3 or 3.5

1. PSX Backups will boot directly.
2. PS2 CD-R Backups will boot directly.
3. PS2 Unpatched EA backups will boot directly.
4. PS2 DVD-R Backups will boot directly.


Ps2 with Apple Mod

1. PSX Backups will boot directly.
2. PS2 CD-R Backups will boot directly.
3. PS2 Unpatched EA backups will boot directly.
4. PS2 DVD-R Backups will boot directly.[CODE] 

How to Back Up the Registry

Before you edit the registry, export the keys in the registry that you plan to edit, or back up the whole registry. If a problem occurs, you can then follow the steps how-to restore the registry to its previous state.


How to Export Registry Keys

Click Start, and then click Run.

In the Open box, type regedit, and then click OK.

On the File menu, click Export.

In the Save in box, select the boxs at the bottom the bottom according to weather you want to export all or only selected branches of the registry.

Next select a location in which to save the backup .reg file. In the File name box, type a file name, and then click Save.


How to Restore the Registry

To restore registry keys that you exported, double-click the .reg file that you saved. 

How To Add Your Own Windows Tips

re you sick of seeing the same tips again and again when you first logon to Windows? Now you can change them to whatever you want, whether it's quotes, jokes or a to-do list, anything is possible.

Open your registry and find the key below.

HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows\ CurrentVersion\ Explorer\ Tips

Create a new string valued named by incrementing the existing value names and set it to the required tip text.

eg. 32 - Dont forget to Visit ShareOrDie.com

How to Add an Option to Print the Contents of a Folder

How to Add an Option to Print the Contents of a Folder

Would you like to be able to right click any folder in Explorer and print its contents? You can add this option to the context menu by following these steps:

First, you need to create a batch file called Printdir.bat. Open Notepad or another text editor and type (or cut and paste) this text:

@echo off
dir %1 /-p /o:gn > "%temp%\Listing"
start /w notepad /p "%temp%\Listing"
del "%temp%\Listing"
exit

Now, in the Save As dialog box, type "%windir%\Printdir.bat" (without the quotation marks) and click the Save button.
Click Start, Control Panel, Folder Options.
Click the File Types tab, and then click File Folder.
Click the Advanced button.
Click the New button.

In the Action box, type "Print Directory Listing" (without the quotation marks).

In the Application used to perform action box, type "Printdir.bat" (without the quotation marks).

Click OK in all three dialog boxes to close the dialog boxes.

You're not quite finished yet! Now you need to edit the Registry, so open your favorite Registry Editor.

Navigate to HKEY CLASSES ROOT\Directory\shell.

Right click on "default" and select Modify.
In the File Data box, type "none" (without the quotation marks).

Click OK and close the Registry Editor.

Now when you right click a folder, you'll see the option to Print Directory Listing. Selecting it will print the contents of the folder.

Who needs a stinking program to print a folder directory?

How To Add A Url Address Bar To The Taskbar

You can add an Internet URL address bar to your Windows XP taskbar. Doing so will let you type in URLs and launch Web pages without first launching a browser. It will also let you launch some native Windows XP applications in much the same way as you would via the Run menu (so you could type in calc to launch the calculator or mspaint to launch Microsoft Paint. Here's how you add the address bar:

1. Right-click on the taskbar, select Toolbars, and then click Address.

2. The word Address will appear on your taskbar.

3. Double click it to access it.

4. If that doesn't work, your taskbar is locked. You can unlock it by right-clicking on the taskbar again and uncheck Lock the Taskbar.

NOTE: You may also need to grab the vertical dotted lines beside the word Address and drag it to the left to make the Address window appear.

How To Add A Url Address Bar To The Taskbar

You can add an Internet URL address bar to your Windows XP taskbar. Doing so will let you type in URLs and launch Web pages without first launching a browser. It will also let you launch some native Windows XP applications in much the same way as you would via the Run menu (so you could type in calc to launch the calculator or mspaint to launch Microsoft Paint. Here's how you add the address bar:

1. Right-click on the taskbar, select Toolbars, and then click Address.

2. The word Address will appear on your taskbar.

3. Double click it to access it.

4. If that doesn't work, your taskbar is locked. You can unlock it by right-clicking on the taskbar again and uncheck Lock the Taskbar.

NOTE: You may also need to grab the vertical dotted lines beside the word Address and drag it to the left to make the Address window appear.

How To Access Your Folders From Your Taskbar

How To Access Your Folders From Your Taskbar

This is an easy way to get to the folders on your system without having to open a Windows Explorer Window every time you want to access files. I find it very useful to have this feature as it allows me to access my Folders and Drives immediately and saves me a lot of time.

This works in Windows XP:

1. Right Click an empty spot on your Taskbar (Between your Start Button and your System Tray).
2. Click Toolbars.
3. Click New Toolbar.
4. A Small Window will Open that allows you to pick the folder you wish to make a Toolbar. If you want to access your Desktop Without having to minimize all your windows. Just Pick Desktop. If you want to access ONLY your My Documents Folder, Select that. Any folder will work for this.
5. Click OK.
The New Tool bar will appear at the bottom of your screen next to your System Tray.

If you find this to be not useful, Repeat Steps 1 and 2 and then check click the Toolbar you created that has a check mark next to it. And it will disappear.

How Long Has Your System Been Running?

 How Long Has Your System Been Running?

Here's how you verify system uptime:

Click Start | Run and type cmd to open a command prompt.
At the prompt, type systeminfo

Scroll down the list of information to the line that says System Up Time.

This will tell you in days, hours, minutes and seconds how long the system has been up.

Note that this command only works in XP Pro, not in XP Home. You can, however, type net statistics workstation at the prompt in Home. The first line will tell you the day and time that the system came online.

How Do U See Hidden Files, Using DOS..

 Simple and useful tip
******************
at command prompt just type
dir /ah
if the list is too long u can use
dir /ah/p/w
*******************

How Do U See Hidden Files, Using DOS..

 Simple and useful tip
******************
at command prompt just type
dir /ah
if the list is too long u can use
dir /ah/p/w
*******************

How do I Test My VirusScan Installation

How do I Test My VirusScan Installation? (Eicar)

Description

After installing VirusScan, you may logically wonder, how do I know if it's working? The answer is a test virus. The EICAR Standard AntiVirus Test File is a combined effort by anti-virus vendors throughout the world to implement one standard by which customers can verify their anti-virus installations.

Solution

To test your installation, copy the following line into its own file, then save the file with the name EICAR.COM. More detailed instructions are found below.

X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*

The file size will be 68 or 70 bytes.

If VirusScan is running and configured correctly, when you try to save the file, VirusScan will detect the virus. If VirusScan is not running, start it and scan the directory that contains EICAR.COM. When your software scans this file, it will report finding the EICAR test file.

Note that this file is NOT A VIRUS. Delete the file when you have finished testing your installation to avoid alarming unsuspecting
users.

The eicar test virus is available for download from the following website:
http://www.eicar.org/download/eicar.com

Creating Eicar.com

   1. Click on Start.
   2. Select Run.
   3. In the Open box type: notepad
   4. Maximize the window.
   5. Highlight the following on the following line of text:
      X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*
   6. Right click on the highlighted text and choose 'copy'.
   7. Switch back to Notepad.
   8. Right click anywhere inside of Notepad and select 'paste'.
   9. Click the File menu and select 'save as'.
  10. Change the 'Save as Type' to 'all files'.
  11. Name the file eicar.com.

Hide Drives and Partitions

Hide Drives and Partitions

Do you have data on a partition or hard drive that you don't want tampered with or easily accessible to other users? Well, you can hide any drive/partition in Windows XP, NT, and 2000. That means that they won't show up in Explorer or My Computer.

If you want access to that drive from your user account you should create a desktop shortcut before proceeding. Once hidden, you can still access by typing the drive letter and a colon in Start/Run—for example, "D:" will bring up a folder of the contents on your D drive.

The easiest way with Win XP is to use the TweakUI power toy from Mcft. Go to Start/Run and type in "tweakui" (without the quotes).

Go to My Computer/Drives and uncheck the drive/partition(s) you want hidden. Click "Apply" or "OK" when finished.

If you have XP but not Tweak UI you can download it here...
http://www.Mcft.com/windowsxp/downloads/powertoys/xppowertoys.mspx

For Win NT, 2000, and XP you can use the following Registry edit:

*Be sure to back up the Registry before proceeding
http://www.worldstart.com/tips/tips.php/401

Open the Registry Editor by going to Start/Run and typing in "regedit" (without the quotes). Find your way to...

HKEY_CURRENT_USER\Software\Mcft\Windows\CurrentVersion\Policies

Click on "Explorer".

Double-click the "NoDrives" key in the right column. If you don't find a "NoDrives" registry key, just right-click in the right pane and choose "New/DWORD Value" then name the key "NoDrives".

You'll see a value like "0000 00 00 00 00". This is where the fun starts. The four sets of double zeros (after the "0000") are where you'll enter the values for the drive/partitions. Now, stay with me on this—it's not as complicated as it sounds:

The first column is for drives A-H, the second for I-P, the third for Q-X, and the fourth for Y-Z.

The values for each drive are as follows:

1 - A I Q Y
2 - B J R Z
4 - C K S
8 - D L T
16 - E M U
32 - F N V
64 - G O W
80 - H P X

So, let's say you want to hide drive D. In the first column you would put "08". For drive K you would put "04" in the second column.

But what if you want to hide more than one drive in a column? Simply add the values together: D+E = 8+16 = 24. So in the first column you would put "24".

Still baffled? If you have XP then go get TweakUI and save yourself the math.

Whichever method you use, you can rest easy knowing that the files on that drive or partition are less accessible to other users.

Hex, How to turn binary or decimal to hex

First go to http://www.shareordie.com/forum/index.php?showtopic=3269 to learn binary.

OK, 1,453,752 is 101100010111010111000 is binary, now we turn it into a Hex number.

First Hex numbers goes like this:
1=1
2=2
.
.
9=9
10=A
11=B
12=C
13=D
14=E
15=F

Now you need to take the first octet (the far right 4) and place it under this little grid:

8 4 2 1
--------
1 0 0 0 = 8

See the 1 under the 8 column?
That is what you add.

So the next octet is 1011, put it under the grid:

8 4 2 1
--------
1 0 0 0 = 8
1 0 1 1 = B

See 8+2+1=11, so you can't just say 11 you have to put it in a Hex number, which is B.
So the full Hex number of 1,453,752 is:

8 4 2 1
--------
1 0 0 0 = 8
1 0 1 1 = B
1 1 1 0 = E
0 0 1 0 = 2
0 1 1 0 = 6
0 0 0 1 = 1 <-- Just add zero if it isn't a full octet

162EB8

So if you want to turn a number in to the shorter version of Hex, just turn it into binary, then use this grid and you'll do fine



P.S. Thanks Korrupt for the number to work with

Have Notepad In Send To

Have Notepad In Send To



Many apply a registry tweak to have notepad as an option for unknown file types. We frequently see such files which are actually just text, but named with some odd file-extension. And then, some suspicious files which we want to make sure what the contents are. Well, in such cases where the registry tweak is applied, the downside happens to be that even some known files get associated with notepad - but no, all we want is to be able to open a file with notepad - the association part in such cases is unwanted interference. Also, notepad becomes a permanent fixture on the right-click menu - which is again an annoyance.

So what we do, is to have notepad as an option in the Send-To options, of the right-click menu in explorer. It fulfils the purpose to perfection (atleast, in my case). Here's what we do:

1. right-click desktop, choose "New >> Shortcut"
2. Type the location of the item - "notepad" - (that's all, no need to give path)
3. Next >> type name for shortcut - "Edit with Notepad"
4. Click finish
5. Now right-click this shortcut on the desktop, and choose properties.
6. Confirm that the "target" and "start in" fields are using variables - "%windir%\system32\notepad.exe" - (absolute paths will be problematic if you use this .LNK on machines other than your own)
7. Now, browse to "%UserProfile%\SendTo" in explorer (which means "C:\Documents and Settings\User_Name\SendTo\" folder)
8. And copy the "Edit with Notepad.lnk" file which you already created, to that folder.
9. So now, you can right-click on ANY file-type, and be offered an option to open with notepad, from the SendTo sub-menu.

So now, you just right-click on an .nfo or .eml or .diz file (which are associated with other programs, and are sometimes just plain-text files), and choose "Send To >> Edit with Notepad" and it will open in notepad!
No more botheration of applying registry tweaks for something as simple as this.

Hardware Firewall

The best firewall is a hardware firewall that is completely separate from your operating system. It need not be a dedicated router, could be an old pentium box running Linux. Below I have found some sites that have How To's on setting up an outside hardware router using an old computer and using a little linux program that fits on a single floppy disk.

Brief Description:
floppyfw is a router with the advanced firewall-capabilities in Linux that fits on one single floppy disc.

Features:
Access lists, IP-masquerading (Network Address Translation), connection tracked packet filtering and (quite) advanced routing. Package for traffic shaping is also available.
Requires only a 386sx or better with two network interface cards, a 1.44MB floppy drive and 12MByte of RAM ( for less than 12M and no FPU, use the 1.0 series, which will stay maintained. )
Very simple packaging system. Is used for editors, PPP, VPN, traffic shaping and whatever comes up. (now this is looking even more like LRP (may it rest in peace) but floppyfw is not a fork.)
Logging through klogd/syslogd, both local and remote.
Serial support for console over serial port.
DHCP server and DNS cache for internal networks.

floppyfw


h#tp://www.zelow.no/floppyfw/



Sentry Firewall CD-ROM is a Linux-based bootable CDROM suitable for use as an inexpensive and easy to maintain firewall, server, or IDS(Intrusion Detection System) Node. The system is designed to be immediately configurable for a variety of different operating environments via a configuration file located on a floppy disk, a local hard drive, and/or a network via HTTP(S), FTP, SFTP, or SCP.

The Sentry Firewall CD is a complete Linux system that runs off of an initial ramdisk, much like a floppy-based system, and a CD. The default kernel is a current 2.4.x series kernel with various Netfilter patches applied. An OpenWall-patched current 2.2.x kernel is also available on the CD.

Booting from the CDROM is a fairly familiar process. The BIOS execs the bootloader(Syslinux) - which then displays a bootprompt and loads the kernel and ramdisk into memory. Once the kernel is running, the ramdisk is then mounted as root(/). At this point our configuration scripts are run(written in perl) that configure the rest of the system. It is the job of these configure scripts to put the various startup and system files into the proper location using either what is declared in the configuration file(sentry.conf) or the system defaults located in the /etc/default directory.

Most of the critical files used at boot time can be replaced with your own copy when declared in the configuration file. This is essentially how we allow the user to configure the system using his/her own configuration and init files.

All of the binaries, files, scripts, etc, used to create the CD-ROM are also available on the CD-ROM. So, with a little practice, you can easily build and customize your own bootable Sentry Firewall CD. Please see the HOWTO for more details.


Sentry Firewall


ht*p://www.sentryfirewall.com/docs.html#overview

Hard drive gone bad

Hard drive gone bad

The most common problems originate
from corruption of the master boot record, FAT, or directory.
Those are soft problems which can usually be taken care of
with a combination of tools like Fdisk /mbr to refresh the
master boot record followed by a reboot and Norton disk doctor
or Spinneret.

The most common hardware problems are a bad controller, a bad
drive motor, or a bad head mechanism.

1. Can the BIOS see and identify the hard drive correctly? If
it can't, then the hard drives onboard controller is bad.

2. Does the drive spin and maintain a constant velocity? If it
does, that's good news. The motor is functioning.

3. If the drive surges and dies, the most likely cause is a
bad controller (assuming the drive is cool). A gate allowing
the current to drive the motor may not be staying open. The
drive needs a new controller.

4. Do you hear a lot of head clatter when the machine is
turned on and initialized (but before the system attempts to
access the hard drive). Head clatter would indicate that the
spindle bearings are sloppy or worn badly. Maybe even lose and
flopping around inside.

5. There is always the possibility that the controller you are
using in the machine has gone south.

1. If the drive spins, try booting to the A> prompt, run Fdisk
and check to see if Fdisk can see a partition on the hard
drive. If Fdisk can see the partition, that means that it can
access the drive and that the controller electronics are
functioning correctly. If there is no head clatter, it may be
just a matter of disk corruption which commonly occurs when a
surge hits you machine and overwhelms the power supply voltage
regulator. It commonly over whelms the system electronics
allowing an EM pulse to wipe out the master boot record, file
allocations table, and primary directory. Fdisk can fix the
master boot record and Norton Disk Doctor can restore the FAT
and Directory from the secondaries.
2. The drive spins but Fdisk can't see it. Try the drive in
another system and repeat the test to confirm that Fdisk can't
read through the drives onboard controller. If it sees it in
another system, then your machines hard drive interface is
bad. You can try an upgraded or replacement controller card
like a Promise or CMD Technologies (there are others) in you
machine after disabling the integrated controller in the BIOS,
but if the integrated controller went south, it may just be
symptomatic of further failures and you'd be wise to replace
the motherboard. Trying the drive in another machine also
eliminates the variable that your machines 12 volt power
output being bad

3. If you get head clatter but a constant velocity on the
drive motor (no surging), you might try sticking the hard
drive in the freezer for about 12 hours. This is an old trick
from back in the days of the MFM/ESDI driver era. This can
cause the drive components to shrink enough to make the track
marker align with the tracks. We don't see that kind of
platter spindle wear much anymore, but back in the old days,
the balancing and bearings weren't as good. Still, under the
right circumstances, it might help. It would depend on how old
the drive is and how many hours of wear have occurred. You
have to be quick to get your info off the drive when it works.
Back then, the drives were much smaller, so there wasn't so
much to copy. So, go after the important data first.

4. The drive doesn't spin. Either the onboard controller is
bad or the motor is bad (assuming you did try the drive in
another machine). It's time to hit the net and local
independent shops to see if you can locate another drive of
the same make and model that's good. Since the drive is
probably an older drive and no longer in distribution, your
best bet is to find an identical used drive. If you know
someone with the same make and model, you might be wise to try
and persuade them to sell you their drive with an offer of
providing them with a free upgraded drive. If you can locate
an identical drive, start with the controller replacement ...
this is the simplest and least invasive. If swapping the
controller doesn't produce the desire result, you can tear
into the drive and swap the motors. While you have both drive
opened up to accomplish this, scrutinize the platters, heads
and armatures. You might even hook the drive up and power it
from a system with both drives attached. This way, you could
see anything that deviates between the actions of both drives
when they are initialized. Swapping patters is unlikely to
produce any positive result. They are a balanced system like
the tires on your car and I suspect that the balance will be
different for each drive as will other variables.

5. There's always Ontrack Corp. who will attempt to recoup
your info starting at $500 and going up from there. They don't
fix and return the drive either.

If the info is all that important to you, I would seek some
professional and experience technician in your locality who
makes his living from servicing and building computer systems
... not just selling them. If you have had much experience
salvaging information from bad hard drives, your likelihood of
success is low. In the case of soft corruption, all utilities
have their eccentricities. Often times, Norton Disk Doctor
will go too far (if you let it). It's wise to just let those
utilities small steps and then have a look at the drive and
see if you can copy it off. Norton will go so far as to rename
directories and files, and even delete them or break them up
into fragments which are useless.
_________________

Guide For Getting Free Stuff

Guide For Getting Free Stuff

Ok, if you are like me you have heard so much about the FreeIpods and FreeFlatScreens websites on different forums, blogs, IM's, etc, you are about to puke. So am I. But yet the draw of getting an Ipod for doing basically nothing is pretty strong. I dismissed all the "stories" of people getting their ipods as the marketing machine at work. However, when Kevin Rose published that not only did he receive his, but a few of his friends did as well, I figured I might take a chance and give it a go. Today I received proof that it does indeed work. Yep, I got my iPod.

Whats in it for them?
Step 1. Collect Names.
Step 2. Send those names items worth $200 or more
Step 3. ?????
Step 4. Profit

Before I signed up, I wanted to get to the bottom of the ?????. I didn't want any sweaty, filth pushing webmonkeys to have all my info, so I did my research. Gratis Internet, the parent company of the FreeIpods, FreeFlatscreens, etc. sites, recently did an interview with Wired Magazine.
In this article Gratis states that they are acting as Head Hunters for companies (more on that later) and are paid between $50-$90 per referral. Although this seems like a lot of money, this is nothing compared to what these companies spend for print advertising which does not guarentee ANY customers. So now we know what ?????? equals. ??????=$50-$90 for Gratis per guranteed customer (referral sites).

How Does it Work?
You sign-up on one (or more) of the following websites:

http://www.FreeMiniMacs.com/?r=14098976
This site gives away free Mini Macs. At the time of this writing only the 80gb MiniMac was available.

http://www.FreeDesktopPC.com/?r=13082204
This site gives away free flat screen monitors and TVs. At the time of this writing the following flat screens were available: Sony 19" LCD, Samsung 15" SyncMaster 510MP LCD TV, Samsung SyncMaster 710N LCD Monitor, Sony 27" FD Trinitron WEGA TV, or a 24" Toshiba TV/VCR/DVD combo

http://www.FreeGamingSystems.com/?r=12660654
This site gives away gaming systems. At the time of this writing the Slim PS2, Xbox, Nintendo Gamecube, and Nintendo DS were available.

http://www.FreeHandbags.com/?r=13950244
This site gives away high-end handbags. Might be a good surprise for your wife or girlfriend. =) At the time of this writing the following bags were available: Prada Mini-Hobo (black, Pink, Powder Blue), Burberry Novacheck Minisling, Coach Signature Demi Pouch (black, camel, purple), Kate Spade Pia Pochette (Black, Pink, Red)

http://www.mp3players4free.com/default.aspx?r=82419
This site gives out free mp3 players. You can get paypal $275, ipod, rio carbon, iriver, ipod mini.

http://www.dvrs4free.com/default.aspx?r=90581
This site gives away TiVo, Replay TV, and $275 paypal.

http://www.macminis4free.com/default.aspx?r=181183
Another mini mac site.

http://www.cameras4free.com/default.aspx?r=90773
This site is giving away high end digital cameras. At the the time of writing this, you follow cams are available: Canon Powershot S1 IS, Sony DSC-P100, Sony DSC-W1, Canon Powershot A95, $325 paypal.


Ok, so here is the tricky part. Once you sign up with one of these websites, you have to complete an "offer" from gratis's advertisers. There are numberous offers, some being better than others. Now remember the ???? = $50 - $90 equation? In order for you to receive your ipod/Flatscreen/Desktop PC/Handbag you have to refer 5, 8, or 10 of your friends, and they have to complete one of the offers as well. Then in order for them to receive theirs they need to refer others, and so on. So lets just look at why they are going to send an Ipod to you. (1(you) + 5(your friends)) x $90 = $540 - $250(ipod) = $290 profit for them just for you signing up. The advertisers are more than willing to pay, and FreeIpods is more than happy to send you your ipod. Works out for everyone.

What is the basic "lingo"?
"ref"/"referral" = The thing required to get your free items. These are your friends.
"green" = Status indicator that means your offer has been completed.
"yellow" = Status indicator that means your offer has yet to be completed or is in the process/pending.
"hold" = Means your account has been suspended or stopped. DON'T CHEAT.
"STV" = Means your product has been "Shipped To Vendor" You should recieve it in about 10 days time.

What process should you use to sign up (to ensure that you will get your item)
When signing up, it is recommended that you use Internet Explorer (sucks) some people have reported problems using other browsers (ex. Firefox, opera, etc.) Also make sure you have cookies accepted.

1. Click on one of the links above and enter a VALID US mailing address.

2. Complete the marketing survey - not your answers do not have any impact on you receiving your item. Just say no to them.

3. Once you have signed up, you should receive a verification email. If you did not receive one, go to the "My Account" page and click the link to have them resend it. If you still did not get it check your spam folder.

4. Sign-up with one of their partners and complete the offer. (see the section which offer should I choose) It can take up to 15 days for your offer to show completed. (A term that we freebie goers use for a "completed offer" is called "credit.") But usually they show completed after 24 hours. Be patient. If it doesn't show up as completed, you can email the site with proof and confirmation for signing up and they will give you credit.


Which offer should I choose?
Just so you know all offers require a credit card, **HOWEVER** not all of them cost anything! =) Here is a list of my recommended offers and I have not had any problems whatsover with doing these.

* Video Professor: This requires a credit card and pay only $3 shipping for computer tutorial CDs. After you receive the CDs, just call customer support and cancel your membership. Return to sender the CDs and they will refund you the shipping costs.

* Complete Home: Instant verification. Sign up for their program for $1 two month trial. You get a FREE $20 Lowes Gift Card just for doing this offer. Cancel your subscription within the 2 month trial and pay NOTHING and keep the gift card!

* Buyer's Advantage: Instant verification. Sign up for their program for $1 two month trial. You get a FREE $20 Circuit City Gift Card just for doing this offer. Cancel your subscription within the 2 month trial and pay NOTHING and keep the gift card!

* Great Fun: Instant verification. Sign up for their program for $1 two month trial. You get a FREE Walkie Talkie just for doing this offer. Cancel your subscription within the 2 month trial and pay NOTHING and keep the gift card!

* Traveler's Advantage: Instant verification. Sign up for their program for $1 two month trial. You get a FREE Thin Digital Camera just for doing this offer. Cancel your subscription within the 2 month trial and pay NOTHING and keep the gift card!

* eFax Plus: Sign up for their fax service. You get a 30 day free trial. Upon receiving credit for doing the offer, simply cancel the service within the free trial and pay nothing! It usually take 1-3 days to receive credit for this offer.

* Blockbuster Online: Try a two week trial of Blockbuster's Netflix-like service. Cancel online within trial time and pay nothing.

*Zooba: If you are a book fan, sign up for this offer. You get a book for $10 with free shipping. Instant verification.

*Various Credit Card offers: Apply for a credit card and get approved. When it arrives, cut it up and toss it out. Nothing to cancel, nothing to pay, and free stuff to gain!

Many of these offers are big companies, so you do not have to question the legitimacy for signing up under them. In other words, you will be safe because you are giving your credit card information to aol, blockbuster, and general motors, and i highly doubt that they will sell this info.

These are free, as long as you cancel within the trial period. Some offer online cancellations while others require calling their support number. Just tell them that you dont find yourself using their services enough so you want to cancel and they'll cancel your membership without any problems.

Cheating
Many of these free sites take cheating very seriously. If you want your free gift and not have you account suspended, simply DON'T CHEAT! Don't refer yourself and do all the offers yourself. If you think you can cheat the system because you are a 1337 h4x0r and you can use proxies and IP spoofs to refer yourself, DON'T DO IT. When you are in the approval stage, they will intensely throughly examine your account and make sure that all your referrels are legit and unique. Trust me, I know many people who have gotten suspended for attempting to cheat.

Multiple Accounts
This goes under cheating. It is wise not to create multiple accounts under the same site because it is against the free site's TOS. They suspend you no matter what your reason is, even if it was an accident. This also includes referring family members. You can only create one account under one household, under one IP address per site. So you cannot refer mother, sister, or brother to do it unless they live in another household.

So you've ran out of offers to do. What do I do?
Ok, if you are a freebie freak, you will probably eventually run out of offers to do because of the fact that you signed up for so many free sites did all the easy free offers. What shoud you do? Remember that free sites give you credit for a unique signup for the offers. So if you signed up for blockbuster online offer at freeflatscreens, you cannot do it again for another free site such as freedesktoppc. But there is a trick to this. A unique signup = a unique credit card that you used to sign up. So if you have a another credit card, you can sign up for the offer again. Another method is to purchase a visa gift card from your mall, or go to www.webcertificate.com and purchase a virtual debit/credit card and do the offers with those.

If you followed all these steps correctly, your free gift will be delivered to your doorstep in no time.

Here are the steps:
1. Getting friends to sign up under you
2. Approval Stage: They will analyze your account for fraud. Takes 1 week.
3. Pending Stage: Your account have been approved. You are now processing. This will take 1-2 weeks.
4. STV: Sent to Vendor. Your product will arrive in 10 days.
5. Shipped: Congrats!

Most of these freebie sites are for U.S residents only.

Graffiti On Walls 4 Adobe Photoshop Cs 8.0

Graffiti On Walls 4 Adobe Photoshop Cs 8.0

Graffiti On Wall Tutorial For
Photoshop Cs 8.0

For This Tutorial You Must Have A Basic Understanding Of Adobe Photoshop Cs 8.0, Example : Where The Features Of The Program Are.
CODE

For This Tutorial You Will Need The Font Called Political Graffiti FIll Which Can Be Aquired Here:
http://www.dafont.com/en/font.php?file=political_graft

And

The Starting Wall Picture Which Can be Aquired Here:
http://www.imagehosting.us/imagehosting/showimg.jpg/?id=59054





(1). Open Photoshop Cs 8.0

(2). Open Wall Picture

(3). Type Ur Second Name In Red At 210pt Font Size In The Political Graffiti Fill Font.

(4). Click Icon All The Way At The Topright That Looks Like A T With A Rounded Line Under It. (Warp Text)

(5). Distort Style Squeeze Vertical, Bend = -31%, Horizontal Distortion = +18%, Vertical Distortion = +34%

(6). Layer> Layer Style> Blending Options, General Blending> Opacity 79%> Fill Opacity 100%, Blend If: Gray, Underlying Layer Black 60, White 210

(7). Type Ur First Name In Red At 210pt Font Size In The Political Graffiti Fill Font.

(8). Click Icon All The Way At The Topright That Looks Like A T With A Rounded Line Under It. (Warp Text)

(9). Distort Style Squeeze Vertical, Bend = +50%, Horizontal Distortion = 0%, Vertical Distortion = -31%

(10). Layer> Layer Style> Blending Options, General Blending> Opacity 79%> Fill Opacity 100%, Blend If: Gray, Underlying Layer Black 60, White 210

(11). Duplicate Both Layers

(12). Move Copied Layers One On Top Of The Other (In The Layer Menu)

(13). Hide The Original Ur Second Name And Ur First Name Layers By Clicking The Eye Icons So That They Dissapear.

(14). In The Copies, Right Click (One At A Time) And Click Rasterize Layer.

(15). Go to Layer> Merge Down (Ctrl + E) (On Top Name Layer).

(16). Layer> Layer Style> Stroke Change Color To Black, Size to 8, Then Opacity To 68%.

(17). Save If No Blur Effect Wanted

(18). Filter> Blur> Smart Blur> Mode: Overlay Edges, Threshhold 48%, Radius 6, Quality: High.

(19). Layer> New Layer

(20) Brush Tool (B), Paint Brush With The Soft 16pt Airbrush For Spraypaint Effect.

(21). Smuge Around Graffiti For Paint Smudge Look For Good Effect (Optional)

(22). Save.


Finito

Final Images:

CODE
Graffiti With Blur:
http://www.imagehosting.us/imagehosting/showimg.jpg/?id=59056

Graffiti No Blur:
http://www.imagehosting.us/imagehosting/showimg.jpg/?id=59057

Google Tips & Tricks, (utilizing search engine)

==================================================
Utilizing search engines
==================================================

So much information is on the web, its mind boggling. Thankfully we have search
engines to sift through them and catagorize them for us. Unfortunatly, there is still so
much info that even with these search engines, its often a painstakingly slow process
(something comparable to death for a hacker) to find exactly what you're looking for.

Lets get right into it.

I use google.com as my primary search engine because it presently tops the charts as far as
the sites that it indexes which means more pertinent info per search.

1. Page translation.
Just because someone speaks another language doesn't mean they dont have anything useful to say. I use translation tools like the ones found at

http://babelfish.altavista.com
and

http://world.altavista.com
to translate a few key words I am searching for. Be specific and creative because these tools arent the most accurate things on the planet.

2. Directories.
These days everything is about $$$. We have to deal/w SEO (search engine optimization) which seems like a good idea on paper until you do a search for toys and get 5 pornsites in the first 10 results. Using a sites directory will eliminate that. You can narrow your search down easily by looking for the info in specific catagories. (PS google DOES have directories, they're at: directory.google.com)

3. Here are some tips that google refers to as "advanced"

A. "xxxx" / will look for the exact phrase. (google isnt case sensitive)
B. -x / will search for something excluding a certain term
C. filetype:xxx / searches for a particular file extention (exe, mp3, etc)
D. -filetype:xxx / excludes a particular file extention
E. allinurl:x / term in the url
F. allintext:x / terms in the text of the page
G. allintitle:x / terms in the html title of that page
H. allinanchor:x / terms in the links

4. OR
Self explanatory, one or the other... (ie: binder OR joiner)

5. ~X
Synonyms/similar terms (in case you can't think of any yourself)

6. Numbers in a range.
Lets say you're looking for an mp3 player but only want to spend up to $90. Why swim through all the others? MP3 player $0..$90 The 2 periods will set a numeric range to search between. This also works with dates, weights, etc

7. +
Ever type in a search and see something like this:
"The following words are very common and were not included in your search:"
Well, what if those common words are important in your search? You can force google to search through even the common terms by putting a + in front of the denied word.

8. Preferences
It amazes me when I use other peoples PCs that they dont have their google search preferences saved. When you use google as much as I do, who can afford to not have preferences? They're located on the right of the search box, and have several options, though I only find 2 applicable for myself...
A. Open results in new browser
B. Display 10-100 results per page. (I currently use 50 per page, but thats a resolution preference, and 5X's the default)

9. *
Wildcard searches. Great when applied to a previously mentioned method. If you only know the name of a prog, or are looking for ALL of a particular file (ie. you're DLing tunes) something like *.mp3 would list every mp3.

10. Ever see this?
"In order to show you the most relevant results, we have omitted some entries very similar to the X already displayed. If you like, you can repeat the search with the omitted results included." The answer is YES. yes yes yes. Did I mention yes? I meant to.

11. Search EVERYWHERE
Use the engine to its fullest. If you dont find your answer in the web section, try the group section. Hell, try a whole different search engine. Dont limit yourself, because sometimes engines seem to intentionally leave results out.
ex. use google, yahoo, and altavista. search the same terms... pretty close, right? Now search for disney death. Funny, altavista has plenty of disney, but no death...hmmm.

If you've read this far into this tutorial without saying, "Great, a guy that copied a few google help pages and thinks its useful info" then I will show you WHY (besides accuracy, speed, and consistancy finding info on ANYTHING) its nice to know how a search engine works. You combine it/w your knowledge of other protocol.

Example:
Want free music? Free games? Free software? Free movies? God bless FTP! Try this search:
intitle:"Index of music" "rolling stones" mp3
Substitute rolling stones/w your favorite band. No? Try the song name, or another file format. Play with it. Assuming SOMEONE made an FTP and uploaded it, you'll find it.

For example....I wanted to find some Sepultura. If you never heard them before, they're a Brazilian heavy metal band that kicks ass. I started with this:
intitle:"Index of music" "Sepultura" mp3 <-- nothing
intitle:"Index of música" "Sepultura" mp3 <-- nothing
intitle:"Index of musica" "Sepultura" mp3 <-- not good enough
intitle:"Index of music" "Sepultura" * <-- found great stuff, but not enough Sepultura

At this point it occurs to me that I may be missing something, so I try:
intitle:"index of *" "sepultura" mp3 <-- BANG!
(and thats without searching for spelling errors)
Also try inurl:ftp

I find that * works better for me than trying to guess other peoples mis-spellings.

The same method applies for ebooks, games, movies, SW, anything that may be on an FTP site.

I hope you enjoyed this tutorial, and I saw that recently a book and an article was written on the very same topic. I havn't read them as of yet, but check em out, and get back to me if you feel I missed something important and should include anything else.

intitle:"index of" "google hacks" ebook


Ps. I've said it before, I'll say it again... BE CREATIVE.
You'll be surprised what you can find.

Go to Windows updates anonymously

Would you like to use the Windows Update feature without being forced to register with Microsoft? OK then, this is what you can do:

Launch good ol' Regedit.
Go down to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion.
Look for a value named RegDone. If it isn't there create a new value with that name.
Right click the new value and choose Modify. Make the value 1.
Close Regedit and
Enjoy!

Getting started with Linux for nOObs!

I. What is Linux?
II. Trying it out
III. Installing
IV. What to do now
V. The Console

Intro:
This tutorial is written with the total Linux n00b in mind.
I've seen too many n00bs get totally left in the dark by asking what
the best distro is. They seem to only get flooded with too many
answers in so short a time. I'm a little bit of a n00b too, so I know
how it feels. I will cover a grand total of two basic distros. You may
learn to strongly prefer other ones (I do!) but this is just to get
you started. I touch on a number of topics that would be impossible to
go into in depth in one tutorial, so I encourage you to actively seek
out more about the concepts I make reference to.


I. What is Linux?

Linux is basically an operating system (OS for short). The Windows
machine you're (probably) using now uses the Mcft Windows
operating system.

Ok, so what's so different about Linux?

Linux is part of a revolutionary movement called the open-source
movement. The history and intricacies of that movement are well beyond
the scope of this tutorial, but I'll try and explain it simply. Open
source means that the developers release the source code for all their
customers to view and alter to fit what they need the software to do,
what they want the software to do, and what they feel software should
do. Linux is a programmer?s dream come true, it has the best compilers,
libraries, and tools in addition to its being open-source. A
programmer's only limit then, is his knowledge, skill, time, and
resolve.

What is a distro?

A distro is short for a distribution. It's someone's personal
modification or recreation of Linux.

What do you mean by distros? I just want Linux!

Since Linux is open source, every developer can write his own version.
Most of those developers release their modifications, or entire
creations as free and open source. A few don't and try to profit from
their product, which is a topic of moral debate in the Linux world.
The actual Linux is just a kernel that serves as a node of
communication between various points of the system (such as the CPU,
the mouse, the hard drive etc.). In order to use this kernel, we must
find a way to communicate with it. The way we communicate is with a
shell. Shells will let us enter commands in ways that make sense to
us, and send those commands to the kernel in ways that makes sense to
it. The shell most Linux's use it the BASH shell (Bourne Again SHell).
The kernel by itself will not do, and just a shell on top of the kernel
won?t either for most users; we are then forced to use a distribution.

What distro is best?

This is not the question you want to ask a large number of people at
one time. This is very much like asking what kind of shoe is best,
you'll get answers anywhere from running shoes, hiking boots, cleats,
to wingtips. You need to be specific about what you plan on using
Linux for, what system you want to use it on, and many other things. I
will cover two that are quick and easy to get running. They may not be
the best, or the quickest, or the easiest, or the most powerful, but
this is a guide for getting started, and everyone has to start
somewhere.

How much does it cost?

computer + electricity + internet + CD burner and CDs = Linux
I'll let you do your own math.
Note however that a few do charge for their distros, but they aren't
all that common, and can be worked around. Also, if you lack internet
access or a CD burner or CDs or you just want to, you can normally
order CDs of the distro for a few dollars apiece.



II. Trying it out.

Wouldn't it stink if you decide to wipe out your hard drive and install
Linux as the sole operating system only to learn that you don't know
how to do anything and hate it? Wouldn?t it be better to take a test
drive? 95 out of a 100 of you know where I'm heading with this section
and can therefore skip it. For those of you who don't know, read on.

There are many distros, and most distros try to have something that
makes them stand out. Knoppix was the first live-CD distro. Although
most of the other main distros have formed their own live-CDs, Knoppix
is still the most famous and I will be covering how to acquire it.

A live-CD distro is a distribution of Linux in which the entire OS can
be run off of the CD-ROM and your RAM. This means that no installation
is required and the distro will not touch your hard disk or current OS
(unless you tell it to). On bootup, the CD will automatically detect
your hardware and launch you into Linux. To get back to Windows, just
reboot and take the CD out.

Go to the Knoppix website (www.knoppix.com). Look around some to get
more of an idea on what Knoppix is. When you're ready, click Download.
You'll be presented with a large amount of mirrors, some of which have
ftp and some of which have http also.

note: the speed of the mirrors vary greatly, and you may want to
change mirrors should your download be significantly slow.

Choose a mirror. Read the agreement and choose accept. You'll probably
want to download the newest version and in your native language (I'll
assume English in this tutorial). So choose the newest file ending in
-EN.iso

note: you might want to also verify the md5 checksums after the
download, if you don't understand this, don't worry too much. You just
might have to download it again should the file get corrupted (you'll
have to anyway with the md5). Also, a lot of times a burn can be
botched for who-knows what reason. If the disk doesn?t work at all,
try a reburn.

Once the .iso file is done downloading, fire up your favorite
CD-burning software. Find the option to burn a CD image (for Nero, this
is under copy and backup) and burn it to a disk. Make sure you don't
just copy the .iso, you have to burn the image, which will unpack all
the files onto the CD.

Once the disk is done, put it in the CD-ROM drive and reboot the
computer. While your computer is booting, enter CMOS (how to get to
CMOS varies for each computer, some get to it by F1 or F2 or F3, etc.)
Go to the bootup configuration and place CD-ROM above hard disk. Save
changes and exit. Now, Knoppix will automatically start. You will be
presented with a boot prompt. Here you can input specific boot
parameters (called cheatcodes), or just wait and let it boot up using
the default.

note: Sometimes USB keyboards do not work until the OS has somewhat
booted up. Once you?re actually in Knoppix, your USB keyboard should
work, but you may not be able to use cheatcodes. If you need to,
attach a PS/2 keyboard temporarily. Also, if a particular aspect of
hardware detection does not work, look for a cheatcode to disable it.
Cheatcodes can be found on the Knoppix website in text format (or in
HTML at www.knoppix.net/docs/index.php/CheatCodes).

Upon entering the KDE desktop environment, spend some time exploring
around. Surf the web, get on IM, play some games, explore the
filesystem, and whatever else seems interesting. When your done, open
up the console (also called terminal, xterm, konsole, or even shell)
and get ready for the real Linux. See section V for what to do from
here.

note: to function as root (or the superuser) type su.


It's not entirely necessary that you are a console wizard at this point
(although you will need to be sooner or later), but a little messing
around wont hurt.

Just as there are many Linux distros, so there are also many types of
Knoppix. I won?t go into using any of them, but they should all be
somewhat similar. Some of them include: Gnoppix, Knoppix STD, Morphix,
and PHLAK. Other distros also have live-CDs.

III. Installing

I will guide you through the installation of Fedora Core 2. The reason
I chose Fedora is because it contains the Anaconda installer, which is
a very easy installer.

Download the discs from here:
http://download.fedora.redhat.com/pub/fedo...ore/2/i386/iso/
If the link doesn?t work, then go to www.redhat.com and navigate your
way to downloading Fedora (odds are your architecture is i386).
You will want to download the FC2-i386-disc1.iso and burn it using the
method for Knoppix. Do the same for all the discs.

Note: do NOT download the FC2-i386-SRPMS-disc1.iso files.

Now, once you?re ready, insert disc 1 into the drive and reboot.

The installer should come up automatically (if not, then see the
Knoppix section on CMOS).

Note: installer may vary depending on version. Follow directions best
you can using your best judgement.

1. Language: choose English and hit enter
2. Keyboard: choose us (probably) and hit enter
3. Installation media: choose local CDROM (probably) and hit enter
4. CD test: you can choose to test or skip
5. Intro: click next
6. Monitor: choose your monitor to the best of your ability, if you?re unsure, choose on of the generic ones
7. Installation type: choose which ever you want (default should be fine)
8. Partition: choose to automatically partition (unless you know what you?re doing)
9. Partition: the default partitions should suffice
10. Boot loader: choose your boot loader (grub for default)
11. Network settings: choose the correct settings for your network (generally, don?t mess with anything unless you know what you?re doing)
12. Firewall: you can choose a firewall if you want to
13. Language support: choose any additional language support you want
14. Time zone: pick your time zone
15. Root password: set your root password (root is the admin, or superuser; you want it to be very secure)
16. Packages: choose which packages you want to install. For hard drives over 10 gigs, you can go ahead and choose all
packages (depending on how much disk space you plan on taking up later, note that most everything you?ll need is a package: the exception
being large media files). You will generally want to install all the packages you think you?ll ever need. Two desktop environments aren?t necessary.
Make sure you have at least one and the X window system! (if you want a GUI that is). I suggest you get all the servers too.

Note: Knoppix uses the KDE Desktop environment

17. Make sure everything is all right, and install
18. You can create a boot disk if you want

Note: Desktop environments might have a set-up once you enter them

IV What to do now

Now that you have a Linux set-up and running, there are many paths you
can head down. First, you should explore your GUI and menus. Browse
the web with Mozilla, get on IM with GAIM, play games, add/delete
users, check out OpenOffice, and anything else that might be part of
your daily use. Also, set up a few servers on your computer to play
around with, specifically SMTP (*wink*wink*), FTP (vsftp is a good
one), and either telnet or SSH (OpenSSH is a good one). The setup and
use of these are beyond the scope of this tutorial, but researching
them could prove to be very educational.

The filesystem
The Linux (and Unix) filesystem is different from the normal Windows
that you?re used to. In Windows, your hard drive is denoted ?C:\? (or
whatever). In Linux, it is called the root directory and is denoted
?/?. In the / directory, there are several default folders, including
dev (device drivers) mnt (mount) bin (binaries) usr (Unix System
Resources) home, etc, and others. I encourage you to explore around
the whole file system (see section V) and research more.

Once you are well situated, it?s time to get into the heart and power
of Linux: the console. The next session will guide you through it and
set you on the path to finding out how to do stuff for yourself. You
will (probably) want to start learning to rely less and less on the
GUI and figure out how to do everything through the console (try
launching all your programs from the console, for example).

V. The Console

The Console might look familiar to DOS if you?ve ever used it. The
prompt should look something like the following:

AvatharTri@localhost avathartri$

With the blinking _ following it. This can vary greatly as it is fully
customizable. Let?s get started with the commands.

First, let?s explore the file system. The command ls will "list" the
files in the current directory. Here?s an example:

AvatharTri@localhost avathartri$ ls

It should then display the contents of the current directory if there
are any. Almost all commands have options attached to them. For
example, using the -l option, which is short for "long" will display
more information about the files listed.

AvatharTri@localhost avathartri$ ls -l

We will get into how to find out the options for commands and what
they do later.

The second command to learn will be the cd command, or "change
directory". To use it, you type cd followed by a space and the
directory name you wish to go into. In Linux, the top directory is /
(as opposed to C:\ in Windows). Let?s get there by using this command:

AvatharTri@localhost avathartri$ cd /
AvatharTri@localhost /$

Now, we are in the top directory. Use the ls command you learned
earlier to see everything that?s here. You should see several items,
which are directories. Now, let?s go into the home directory:

AvatharTri@localhost /$ cd home
AvatharTri@localhost home$

And you can now ls and see what?s around. In Linux there are some
special symbol shortcuts for specific folders. You can use these
symbols with cd, ls, or several other commands. The symbol ~ stands
for your home folder. One period . represents the directory your
currently in. Two periods .. represent the directory immediately above
your own. Here?s an example of the commands:

AvatharTri@localhost home$ cd ~
AvatharTri@localhost avathartri$

This moved us to our user?s personal directory.

AvatharTri@localhost avathartri$ cd .
AvatharTri@localhost avathartri$ cd ..
AvatharTri@localhost home$

The cd .. moved us up to the home directory.
As you?ve probably noticed by now, the section behind the prompt
changes as you change folders, although it might not always be the
case as it?s up to the personal configuration.

You can use these symbols with the ls command also to view what is in
different folders:

AvatharTri@localhost home$ ls ~
AvatharTri@localhost home$ ls ..

And you can view what is in a folder by specifying its path:

AvatharTri@localhost home$ ls /
AvatharTri@localhost home$ ls /home

The last command we will cover as far as finding your way around the
filesystem is the cat command. The cat command will show the contents
of a file. Find a file by using the cd and ls commands and then view
its contents with the cat command.

AvatharTri@localhost home$ cd [directory]
AvatharTri@localhost [directory]$ ls
AvatharTri@localhost [directory]$ cat [filename]

Where [directory] is the directory you want to view and [filename] is
the name of the file you want to view. Omit the brackets. Now, if the
file you viewed was a text file, you should see text, but if it wasn?t,
you might just see jumbled garbage, but this is ok. If the file goes
by too fast and goes off the screen, don?t worry, we will get to how
to scroll through it later.

One of the most useful commands is the man command, which displays the
"manual" for the command you want to know more about. To learn more
about the ls command:

AvatharTri@localhost home$ man ls

And you will see the manual page for ls. It displays the syntax, a
description, options, and other useful tidbits of information. Use the
up and down arrows to scroll and press q to exit. You can view the
manual pages for any command that has one (most commands do). Try this
out with all the commands that you know so far:

AvatharTri@localhost home$ man cd
AvatharTri@localhost home$ man cat
AvatharTri@localhost home$ man man

One very crucial option to the man command is the -k option. This will
search the descriptions of manual pages for the word you specify. You
can use this to find out what command to do what you need to do. For
example, let?s say we want to use a text editor:

AvatharTri@localhost home$ man -k editor

And you should see a list of apps with a short description and the
word "editor" in the description.

With a blank prompt, you can hit tab twice for Linux to display all
the possible commands. For Linux to display all the commands beginning
with a certain letter or series of letters, type those letters and hit
tab twice.

Note: This is actually a function of BASH and not Linux, but BASH is
the default Linux shell.

Now that you know a little about moving around the filesystem and
viewing manual pages, there is one more trick that we will cover to
help you out. Remember how the man pages were scrollable as in you
could use the arrow keys to scroll up and down? That is because the
man pages use something called the less pager. We?re not going to go
into what this does exactly and how it works, but that?s definitely
something that you will want to look up. Here?s how to use the less
pager with a file:

AvatharTri@localhost home$ cat [filename] | less

That uses something called a pipe. The line is the vertical line above
enter on your keyboard. Briefly, what this does is take the output
from the cat command, and stick it in the less pager. By doing this,
you can view files that would normally run off the screen and scroll
up and down.

Some final commands to check out:

mkdir - make directories
cp - copy file
mv - move file
rm - remove file
rmdir - remove directory
grep - search a file for a keyword
pwd - display current working directory
top - display system resources usage (kill the program with control + c)

Getting older programs to run on Windows XP

 Most programs run properly on Windows XP. The exceptions are some older games and other programs that were written specifically for an earlier version of Windows. To run your program on Windows XP, you can try the following, Run the Program Compatibility Wizard. As an alternative, you can set the compatibility properties manually. Update your program, drivers, or hardware. These options are covered in detail below.

The Program Compatibility Wizard
This wizard prompts you to test your program in different modes (environments) and with various settings. For example, if the program was originally designed to run on Windows 95, set the compatibility mode to Windows 95 and try running your program again. If successful, the program will start in that mode each time. The wizard also allows you to try different settings, such as switching the display to 256 colors and the screen resolution to 640 x 480 pixels. If compatibility problems prevent you from installing a program on Windows XP, run the Program Compatibility Wizard on the setup file for the program. The file may be called Setup.exe or something similar, and is probably located on the Installation disc for the program. To run the Program Compatibility Wizard click Start, click Help and Support, click Find compatible hardware and software for Windows XP, and then, under See Also in the navigation pane, click "Program Compatibility Wizard."

Set the compatibility properties manually
As an alternative to running the Program Compatibility Wizard, you can set the compatibility properties for a program manually. The settings are the same as the options in the Program Compatibility Wizard. To set the compatibility properties for a program manually Right-click the program icon on your desktop or the shortcut on the Start menu for the program you want to run, and then click Properties. Click the Compatibility tab, and change the compatibility settings for your program.

The Compatibility tab is only available for programs installed on your hard drive. Although you can run the Program Compatibility Wizard on programs or setup files on a CD-ROM or floppy disk, your changes will not remain in effect after you close the program. For more information about an option on the Compatibility tab, right-click the option and then click "What's This."

Update your program or drivers
If your program does not run correctly after testing it with the Program Compatibility Wizard, check the Web for updates or other fixes, as follows:

Check the Web site of the program's manufacturer to see if an update or patch is available.
Check Windows Update to see if a fix is available for the program.
Click Home on the menu bar of Help and Support Center, then click Windows Update in the right pane.

If the program is a game that uses DirectX, ensure that you are using the latest version of DirectX. In addition, check the Web site of the manufacturer of your video card or sound card to see if newer drivers are available for either of them.

Getting Counter-Strike Source to work

Getting Counter-Strike Source to work

Step 1- Download cssource_notcracked_beta_emporio.rar, cssource_cracked_emporio.rar and cssource_updates_emporio.rar (make sure this update is V2).

Step 2- Extract cssource_notcracked_beta_emporio.rar to a folder (for this example we will use E:/CS: Source*), then extract cssource_cracked_emporio.rar to E:/CS: Source*(overwrite all files) and finally extract cssource_updates_emporio.rar(V2) to E:/CS: Source* (overwrite all files).

Step 3- Make a NEW steam account(We will use Bob1g2** for this example).

Step 4- Now here comes the tricky part. After you have made a NEW steam account, get any counter strike: condition zero key (and no i won't tell you one) off the internet. Launch steam and click on Condition Zero in the Avaible Games list. Click on Register this product and click next. Once you get to the point where it says, "Steam is processing you request" open up Task Manager (Ctrl, Alt, Delete at the same time) and click on steam.exe and once the steam window has 1 bar that is yellow, click terinate process on the task manager.

Step 5- Open up steam again and check if Condition Zero is in your My Games list. If it isn't then repeat Step 3 using a different key untill you get Condition Zero is your My Games list. Once you get it in your My Games list then, download Codename Gordon and once it has finished downloading, launch it. Once you get into the menu, then click exit.

Step 6- Go into the folder where you installed steam and copy ClientRegistry.blob into the folder where you installed CS: Source.

Step 7- Go into the folder where you installed CS: Source and open up SteamApp.cfg.

Step 8- Once you have opened up SteamApp.cfg, edit it so it only has this in it:

CODE

SteamAppId=10
#SteamAppVersionId=0
SteamInstallPath="E:/CS: Source*"
# [as is clearified later on, this should be your email address:]
#SteamAppUser=aalb002@cafe.boomtown.net
SteamAppUser=Bob1g2**


Make sure you change the Bob1g2** bit to the new steam account you created and the E:/CS: Source* to where you installed counter-strike source.

Step 9- Make a sortcut of hl2.exe with these in the sortcut(without the quotes) "-steam -game cstrike"

*Change this to where you installed CS: Source.
**Change this to your new steam account.

Downloads

cssource_notcracked_beta_emporio.rar- fxp://cs.rivera.ru/games/Counter-Strike/CS_Source/client/cssource_notcracked_beta_emporio.rar

cssource_cracked_emporio.rar- fxp://cs.rivera.ru/games/Counter-Strike/CS_Source/client/V2/cssource_cracked_emporio.rar

cssource_updates_emporio.rar(v2)- fxp://cs.rivera.ru/games/Counter-Strike/CS_Source/client/V2/cssource_updates_emporio.rar

Limit is 100 users max

Other things you should know

Don't download the V3 update since that doesn't work yet.

If you get a error saying that you are not subscribed, then do steps 4-6 to make it work again.

If you get unable to set mode then do this:
go to your registry -> HKEY_CURRENT_USER\Software\Valve\Source\Settings -> look up the entry "ScreenRefreshRate" -> doubleclick -> type your favourite monitor hz value into the field (i.e. 100hz, if your monitor can handle it) -> change the base setting from hexadecimal to decimal -> finished. (excerpt taken from flinkerhamster tutorial)

Some Servers

1. 66.199.235.42:27014

2. 24.141.2.86

These servers have being tested by me and are working.